Products
Biceberg
Type of product:
Bicycle parking
Company:
ma-SISTEMAS, s.l.
Stand out:

It facilitates the storage of bicycles.

Characteristics:

Underground, automatic and intelligent parking system that stores bicycles on the street as well as other accessories safe. It has the safest and fastest security system available on the market. It optimizes spaces below-level, with a configuration that facilitates its rapid installation in any space, with capacities for keeping between 23 and 92 bicycles. It consists of a frontal access complemented with urban furniture of reduced impact, friendly and functional, which in turn offers the possibility of installing different public services of multimedia information. It works with a chip card and its use is as simple as controlled accesses, cashiers or telephone booths.

Application:

Availability:

Zebra Separator
Type of product:
Bicycle lane separator
Company:
ZICLA
Stand out:

Resources: Made from 100% recycled material . Emissions: Low emission of greenhouse gases during the production process, from 5.7 kg of equivalent CO2 saved per piece. Waste: recycling, but without specifying the %.

Characteristics:

Rail separator, made from recycled plastic, characterised by its high visibility, mechanical resistance and versatility, both in the disposition of the reflective bands and in the method of placement on the ground (parallel or oblique in reference to the axis). They are flexible, shock absorbers and resistant.

Application:

Suitable for bicycle lane, bus-taxi lane, car parks and tramways.

Availability:

Length (mm) Width (mm) Height (mm): Zebra 13 828 218 129, Zebra 9 775 165 90 with white or yellow reflective paint strips.

ZIMBAD Bench
Type of product:
Bench
Company:
ZICLA
Stand out:

Resources: Made from recycled material. Resources: Product with a long lifespan.

Characteristics:

Manufactured bench from recycled extruded plastic profiles. Resistant to chemical corrosion and to microorganisms attacks. It neither rots nor requires maintenance.

Application:

Availability:

Eco Klinker Brick
Type of product:
Ceramic piece - Manufacture biogas
Company:
Piera Ecoceramica
Stand out:

The use of non-renewable energies for the manufacture of a ceramic block of 1m3 involves a cost of 1600 MJ compared to 700 MJ in the case of using renewable energy. The use of biogas in the manufacturing process of the Eco Klinkers bricks reduces the 35% of the CO2 emissions.

Characteristics:

The Eco Klinkers bricks from Piera Ecoceràmica are made from biogas, which reduces up to a 35% the CO2 emissions during the industrial process. Biogas is a clean fuel that reduces environmental pollution. The biogas used by Piera Ecocerámica comes from the treatment of organic waste buried under layers of clay from the Can Mata landfill, located in Hostalets de Pierola. Piera Ecoceramic avoids the emission into the atmosphere of 17,000 tonnes/year of CO2 as well as other greenhouse gases or ozone depleting gases. The Piera Ecoceramic biogas system allows the application of this energy source in the manufacture of the 95% of the Piera's products, contributing to a 45% of the total thermal energy used. Therefore, the manufacturing of products has a low rate of atmospheric emissions and a total commitment to respect the environment. The entire catalog of Piera Ecoceramic is compatible with the Structura system of ventilated and self-supporting façade construction that meets the requirements of the CTE.

Application:

Availability:

The range of Eco Klinkers is marketed in the following models: Venice: 28 x 13.5 x 5.7 - 28 x 12 x 4.9 (cm), Bellaterra: 28 x 13.5 x 5.7 - 25 x 12 x 4.9 (cm), Red Clinker: 27.6 x 13.3 x 4.8 / 5.8 - 24 x 11.5 x 4.9 (cm), Tuareg: 28 x 13.5 x 5/6 - 24 x 11.5 x 5 (cm), Sahara: 28 x 13.5 x 5/6 - 24 x 11.5 x 5 (cm), Tundra: 28 x 13.5 x 5/6 - 24 x 11.5 x 5 (cm). The Eco Klinker from Piera Ecocerámica have a high resistance, above 55 N/mm2 and a low absorption, between the 4 and 5% on average.