It has an Environmental Product Declaration according to ISO 14025 and EN15804 issued by the Institut Bauen und Umwelt e.V. from Germany.
Solvent-free biocomponent epoxy primer, of fast curing and applied at low temperatures. Properties: cured at low temperature, low viscosity, easy to apply, excellent penetration in the support, it seals pores and capillaries and excellent adhesion on the support.
MASTERTOP P 617 FAST is designed for indoor and outdoor use as a primer on mineral substrates, such as concrete and mortar with MASTERTOP flooring systems and CONIPUR waterproofing systems, when the temperatures are too low for a general purpose epoxy primer or in those applications where reducing the curing time is an important parameter.
MASTERTOP P 617 FAST is supplied in sets of 15.3 kg.
It has an Environmental Product Declaration according to ISO 14025 and EN15804 issued by the Institut Bauen und Umwelt e.V. from Germany.
Self-levelling polyurethane coating for decorative pavements. Bi-component, solvent-free polyurethane coating, self-levelling, elastic, pigmented, of low emission, stable colour and resistant to UV rays for decorative floorings. Properties: Low emissions according to AgBB, stable to colour, resistant to UV rays, elastic, high degree of comfort when footing, noise absorption, resistant, robust, crack tapping capacity, easy to apply and excellent self-levelling capacity.
MASTERTOP BC 361 N is a self-levelling coating of aliphatic polyurethane bicomponent pigmented for floors, free of solvent and of low emissions, which hardens forming an elastic material, resistant, easy to maintain and tolerant to a wide range of cleaning chemicals and variety of chemical compounds. Due to its aliphatic nature, MASTERTOP BC 361 N is stable in colour and resistant to UV rays. MASTERTOP BC 361 N can be used fresh on fresh in order to realize decorative polychromatic floorings. It is the basis of the MASTERTOP 1326 and MASTERTOP 1327 D systems, a range of decorative pavements specially designed for use in boutiques, day-care centres, bars and restaurants, reception areas and offices.
MASTERTOP BC 361 N is supplied in sets of 13 and 26 kg.
It has an Environmental Product Declaration according to ISO 14025 and EN15804 issued by the Institut Bauen und Umwelt e.V. from Germany.
Bi-component polyurethane coating free of solvents, self-levelling, elastic, pigmented and of low emissions. Properties: Low emissions according to AgBB, excellent self-levelling capacity, resistant to abrasion, robust, excellent deaerating ability, easy to clean and maintain, tapping ability of static fissures and good chemical resistance.
MASTERTOP BC 375 N is used indoors where resistance to medium to heavy traffic is required. It is suitable for mineral substrates such as concrete and mortar, previously primed with MASTERTOP epoxy primer. It can also be applied on bituminous supports with a previous primer with the own MASTERTOP BC 375 N. It is part of the MASTERTOP 1324 pavement range.
MASTERTOP BC 375 N is supplied in sets of 30 kg.
It has an Environmental Product Declaration according to ISO 14025 and EN15804 issued by the Institut Bauen und Umwelt e.V. from Germany.
Properties: Reduced viscosity, excellent adhesion to the substrate, easy to apply, sealed with pores and capillaries of the concrete, moisture tolerant in the support, low emission of volatiles and suitable for application on concrete supports contaminated with oils (after cleaning).
Priming prior to the application of epoxy or polyurethane based coatings MASTERTOP pavements or CONIPUR waterproofing systems (only for manual application) on concrete substrates contaminated with oils and/or gas-oil.
MASTERTOP P 615 is supplied in sets of 16.9 kg.
It has an Environmental Product Declaration according to ISO 14025 and EN15804 issued by the Institut Bauen und Umwelt e.V. from Germany.
Solvent-free bicomponent epoxy primer for synthetic coatings on mineral substrates. Properties: Low viscosity, easy to apply, excellent penetration in the support, it seals pores and capillaries, excellent adhesion on the support and low emissions.
MASTERTOP P 617 FAST is designed for indoor and outdoor use as a primer on mineral substrates, such as concrete and mortar with MASTERTOP flooring systems and CONIPUR waterproofing systems. It is possible to use it as a spatula primer by adding MASTERTOP F1 in a ratio from 1: 0.5 to 1: 2. MASTERTOP P 617. It complies with the requirements of the relevant regulations regarding the effect of rising humidity. MASTERTOP P 617 has been tested and classified for its low emissions in systems such as MASTERTOP 1325.
MASTERTOP P 617 is supplied in sets of 18 kg.
The product has a type III eco-label or Environmental Product Declaration based on the DAP®construction System, showing the quantified, disaggregated and verified environmental impacts associated with its life cycle. The most important data in the manufacturing phase are: Impact indicators: Per m2 of coating: Global warming potential: 16.20 kg CO2 Renewable primary energy consumption: 17.20 MJ Non-renewable primary energy consumption: 251 MJ Fresh water consumption: 0.087 m3 Production of waste: 8.74 kg For more environmental information of the product you can access the complete document of the DAPconstruction of the product (pdf attached).
The medium porcelain stoneware product is basically composed of clay, feldspar and sand with an enamel layer composed mainly of feldspar, carbonate, silicates and kaolin, among others.
The main recommended use for this product is for floor paving and/or wall and façade coating, both inside and outside.
The included product is an average porcelain stoneware that includes the following stoneware models: Water absorption group BIb and BIa (Formed by dry pressing with AA between 0.5 and 3% and <0.5% respectively). Commercial name: STON-KER / PAR-KER / STON-KER FACHADAS/ PAVEMENTOS. Nominal formats (cm): 14.3x120x1.2 / 19.3x120x1.2 / 29.4x120x1.2 / 18x65.9x1 / 43,5x43,5x1 / 43x65,9x1 / 59,6x59,6x1,1 / 80x80x1,2 / 59.6x120x1.2.
The product has a type III eco-label or Environmental Product Declaration based on the DAP®construction System, showing the quantified, disaggregated and verified environmental impacts associated with its life cycle. The most important data in the manufacturing phase are: Impact indicators: Per m2 of coating: Global warming potential: 16,70 kg CO2 Renewable primary energy consumption: 57.80 MJ Non-renewable primary energy consumption: 256 MJ Fresh water consumption: 0.0565 m3 Production of waste: 5.30 kg For more environmental information of the product you can access the complete document of the DAPconstruction of the product (pdf attached).
The Dry-pressed ceramic tile (BIa) product is basically composed of clay, feldspar and sand with an enamel layer composed mainly of feldspar, carbonate, silicates and kaolin, among others.
The main recommended use for this product is for both coating and flooring.
The product included is a dry pressed ceramic tile (BIa) that includes the following formats: Water absorption group: BIa Dimensions (cm): 11.9x24.4; 24.4x24.4; 31x31; 31x62.6; 59.4x59.4; 59.4x119; 15.25x78.25; 24.4x49.4; 5.6x24.4; 32x32; 60x60; 29.6x59.4; 39.5x119; 119x119; 29.8x29.8; 29.8x59.8; 59.8x59.8.
The white tile product is basically composed of clay, feldspar and sand with an enamel layer composed mainly of feldspar, carbonate, silicates and kaolin, among others.
The main recommended use for this product is for both coating and flooring.
The product included is a white tile that includes the following models: Water absorption group: BIII all Trade name: Revestimiento pasta blanca. Nominal formats (cm): 25x40; 20x60; 31x44; 30x90; 29.5x89.3; 30.5x60.5; 29.5x59.5 / 25x40; 20x60; 31x44; 31.6X61.6; 30x90; 29.5x89.3; 30.5x60.5; 29.5x59.5.